B-2 BRICK BRITE
A non-acidic solution that effectively removes efflorescence deposits, without damaging or discoloring the surface.
B-2 Brick Brite is an essential step before applying a sealer, as it allows the sealer to adhere better and penetrate more thoroughly. B-2 Brick Brite is safe for use on concrete, brick, pavers, blocks, and other masonry surfaces.
Usage Directions
Wet the paver surface with water.
Dilute the product according to the suggested mix ratios – start with 4 parts water to 1 part product for most cleaning, or use 3 parts water to 1 part product for heavier deposits. Test a smaller area to determine application strength.
Apply the diluted product on the wet paver surface using a pump-up sprayer. Brush if necessary.
Allow a short dwell time.
Rinse with high pressure water, making sure that all foam and residue have been washed free of the surface.
Allow the area to dry for 48 hours before applying sealer.
B-2 Brick Brite cleans approximately 200 SQFT per gallon. Repeat the process if efflorescence remains.