Dual Purpose Truck Wash + Degreaser

Double Threat is a multi-use product that can be used as a brushless traffic film remover as well as a concentrated butyl degreaser. As a single step truck wash (1 drum makes 3), Double Threat sports a high foam profile and manages hard water exceptionally for a free rinse. It is safe on polished aluminum and painted surfaces. As a butyl degreaser (1 drum makes 2), Double Threat is commonly used in house washing, awning cleaning, concrete floor scrubbing and many other industrial applications. Double Threat will work exceptionally well as a pre-spray, through a pump-up sprayer, prior to steam cleaning or hot water washing. It will remove carbon stain, grease, oil, and bugs when sprayed on the surface of a vehicle, before pressure washing. In both cases, Double Threat dries uniformly without streaking or spotting and is effective in both cold or hot water. T&D is popularly used as the second step in a two-step truck washing system at 1 drum makes 4, and is part of Command Chem's Polished Series Two-Step system, paired with Aluma Dog as the first step acid cleaner. Double Threat is designed to minimize labor and to deliver an excellent finished wash. Double Threat is a non-hazardous product.

DIRECTIONS FOR USE

T&D Single Step Truck Wash: 1 drum of Dual Purpose conc makes 3 T&D Truck Wash (#22123) ready to use drums. For use in hot pressure washers, apply to the surface at the rate of 1 part cleaner to 20 parts water.

T&D Degreaser: 1 drum of Dual Purpose conc makes 2 T&D Degreaser (#22112) ready to use drums. For degreasing apply 1:1-1:2 with a pump up sprayer. For general purpose cleaning, best dilutions range from 1:1 to 1:10. However, when used as a pre-spray, it may be used full strength depending on severity of soil.

T&D Two-Step Truck Wash: 1 drum of Dual Purpose conc makes 4 drum of T&D Truck Wash for two step. For use in hot pressure washers, apply to the surface at the rate of 1 part cleaner to 20 parts water. When used through pressure washing equipment, drop detergent feed line into the concentrated cleaner, set metering valve to desired setting, and soak entire surface from bottom up. Detail clean from bottom up and rinse from the top down. Do not allow to dry on surfaces.
Always rinse thoroughly.

Dual Purpose Minimizes & Simplifies Inventory

• Does Not Require Brushing
• Safe On Paint And Polished Aluminum
• High Foam Profile